Installing The Brake Pipes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the brake pipe (3). Tighten. See TIGHTENING TORQUE
- the brake pipe (4). Tighten. See TIGHTENING TORQUE
- the brake pipe in the clips.
Install:
- the lower protective cover for the firewall
- the 3 nuts (2)
- the two brake pipes (1): BRAKE LINES ABS UNIT/PIPE COUPLING REAR, REPLACING .