Installing The Brake Hose
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2013 Volvo C70, 2012 Volvo C70, 2011 Volvo C70, 2010 Volvo C70, and 2009 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For tightening torques, see TIGHTENING TORQUE
.
Install:
- the brake hose (4) to the caliper. Tighten. See TIGHTENING TORQUE
- the brake hose (3) in the mounting
- the retaining clip (2).
- brake pipe in the hose (1). Tighten. See TIGHTENING TORQUE .
NOTE:
Ensure that the brake hose is not twisted. If the brake hose is twisted, there is a risk of circuit failure.