Mudflaps (2010-13): Mudflaps

Fig 1: Identifying Body Section

Courtesy of VOLVO CARS CORPORATION

Fig 2: Turning Wheel

Courtesy of VOLVO CARS CORPORATION

Fig 3: Cleaning Area Where Mudflap Is To Be Positioned

Courtesy of VOLVO CARS CORPORATION

Fig 4: Identifying Screws

Courtesy of VOLVO CARS CORPORATION

Fig 5: Identifying Rivets And Panel

Courtesy of VOLVO CARS CORPORATION

Fig 6: Drilling Hole For Rivet

Courtesy of VOLVO CARS CORPORATION

Fig 7: Identifying Body Section

Courtesy of VOLVO CARS CORPORATION

Fig 8: Identifying Wheel

Courtesy of VOLVO CARS CORPORATION

Fig 9: Identifying Rivets

Courtesy of VOLVO CARS CORPORATION

NOTE: These will not be reused.

Fig 10: Identifying Area That Is To Be Cleaned

Courtesy of VOLVO CARS CORPORATION

Fig 11: Identifying Wing Liner

Courtesy of VOLVO CARS CORPORATION

Fig 12: Identifying Clip

Courtesy of VOLVO CARS CORPORATION

Fig 13: Identifying Mudflap

Courtesy of VOLVO CARS CORPORATION

Fig 14: Identifying Rivets

Courtesy of VOLVO CARS CORPORATION

Fig 15: Drilling Hole For Rivet

Courtesy of VOLVO CARS CORPORATION

Fig 16: Install And Tighten Wheel To Wheel Hub

Courtesy of VOLVO CARS CORPORATION

Wheel to wheel hub tightening torque: