Checking Outer Switches, Door Handle (2007): Notes

• Ignition on
• Check the function of the switches in the door handle by clicking on the VCT2000 symbol
• Select the desired switch and press start.

  Pull the door handle to be checked to the limit position. The value for both switches on the same door handle should be Activated  .

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Was the function OK? 

• YES 

  Refer to FAULT-TRACING INFORMATION 

• NO 

  Refer to CHECKING THE WIRING