Front Door Outer Handle
NOTE:
Removal steps in this procedure may contain installation details.
Disconnect the battery ground cable. See BATTERY DISCONNECTING AND CONNECTING .
NOTE:
Slacken off the screw by 4 turns only.
Torque: Door lock cylinder to external handle (vehicles without keyless vehicle module (KVM))
3 Nm
Torque: Door lock cylinder to external handle (vehicles with keyless vehicle module (KVM))
4 Nm
Only vehicles with KVM (keyless vehicle module).
NOTE:
Make sure that the connector fastens in the park position during dismantling.
To install, reverse the removal procedure