Section 12 (Wheels - Removal And Installation): Suspension: Wheels: Removal

WARNING: This page is about a different car, the 2003 Volvo XC90. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Removal steps in this procedure may contain installation details.

See information about lifting points body, see JACKING POINTS, BODY

Fig 1: Identifying Lug Tightening Using Cross Pattern

Courtesy of VOLVO CARS CORPORATION

WARNING:

Make sure that the mating faces are clean and free of corrosion and foreign material.

Use: Installation paste, 1161397

Fig 2: Identifying Bolt Heads (When Used)

Courtesy of VOLVO CARS CORPORATION

Torque: Wheel to hub (early version)
• Stage 1: 20 Nm

• Stage 2: 110 Nm
Torque: Wheel to wheel hub
• Stage 1: 20 Nm

• Stage 2: 130 Nm