Checking The Start Parameters

Fig 1: Identifying Ignition ON

GLL101051

Courtesy of VOLVO CARS CORPORATION

Ignition on.
NOTE: The heater must be switched off when reading off

Read out the values for quantity of fuel, battery voltage and number of failed start attempts.

The fuel level should be sufficient and the voltage to the heater must not be too low in order for the heater to be started. If the number of failed start attempts is excessive the heater prevents starting.

Remedy as necessary.

Other information:
- For a description of parameters, see DESCRIPTION OF PARAMETERS .
Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS CORPORATION