Repair Cable

Fig 1: Identifying Ignition OFF

GLL101045

Courtesy of VOLVO CARS CORPORATION

Ignition off
Remove relay 2/29 from the central electronic module (CEM) relay holder.
Repair the cable between fuse 11C/24 terminal #2 (10A) and relay holder 2/29 terminal #3. Check for an open-circuit.

Other information:
- To connect the breakout box, see CONNECTING THE BREAKOUT BOX
- For information about signals, see SIGNAL SPECIFICATION
- see CHECKING WIRING AND TERMINALS .
Fig 2: Breakout Box
Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Ohmmeter
Courtesy of VOLVO CARS CORPORATION

Fig 4: Identifying Relays
Courtesy of VOLVO CARS CORPORATION