Checking For An Open-Circuit

Remove relay 2/59 from the integrated relay/fusebox in the cargo compartment. Fault-trace the cable between the secondary side of the fuse holder (left) and terminal #5 in the relay base. Check for an open-circuit.

Other information 

• To access the integrated relay/fusebox in the cargo compartment, see RELAY/FUSE BOX CARGO COMPARTMENT/REAR ELECTRONIC MODULE (REM), REPLACING
• see CHECKING WIRING AND TERMINALS .

Fig 1: Identifying Ohmmeter

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Relays

Courtesy of VOLVO CARS CORPORATION