Checking Wiring And Connectors
Check the wiring between:
connector terminal #5 for the fuel level sensors and rear electronic module (REM) terminal #A02 (#A2)
connector terminal #6 for the fuel level sensors and rear electronic module (REM) terminal #A10 (#A10)
connector terminal #7 for the fuel level sensors and rear electronic module (REM) terminal #A8 (#A8)
check for an open-circuit. Check for a short-circuit to supply voltage.
Check the relevant connectors. Check for contact resistance and oxidation.
Remedy as necessary.
Other information:
- For further information about signals and other values, see SIGNAL SPECIFICATION
- To connect the breakout box, see CONNECTING THE BREAKOUT BOX
- To access the integrated relay/fusebox in the cargo compartment, see RELAY/FUSE BOX CARGO COMPARTMENT/REAR ELECTRONIC MODULE (REM), REPLACING
- To access the fuel level sensor connector (left-hand side), see LEVEL SENSOR, FUEL TANK, RIGHT-HAND/FUEL TANK, REPLACING
- To access the fuel level sensor connector (right-hand side), see LEVEL SENSOR, FUEL TANK, RIGHT-HAND/FUEL TANK, REPLACING
- see CHECKING WIRING AND TERMINALS .