Checking Components
Activate the tailgate wiper using the wiper switch. Read off the status.
HINT: If the wiper switch status is OK, the fault is not in the steering wheel module (SWM).
Was the tailgate wiper status OK?
- YES
FAULT NOT FOUND: Troubleshooting has been completed.
- NO
Refer to REPLACING COMPONENTS
Activate the tailgate wiper. Read off the status.
HINT: If the readout of tailgate wiper status was OK, the fault was caused by a damaged fuse or relay. The fuse can blow if relays are activated in the wrong order. This can happen when the key is turned from position I to position II and the wiper arm is activated at the same time.
Was the tailgate wiper status OK?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to REPLACING THE COMPONENT
Activate the tailgate wiper. Read off the status.
HINT: If the tailgate wiper switch status is OK the fault is in the tailgate wiper.
Was the tailgate wiper status OK?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to REPLACING THE COMPONENT