Checking Supply: Notes
Check passenger compartment fuse 24 (11C/24:2).
Check the cable between combined instrument panel supply relay (2/29) #3 and passenger compartment fuse 24 (11C/24:2) for an open-circuit according to OPEN-CIRCUIT, PERMANENT FAULTS and a short-circuit to ground according to SHORT-CIRCUIT TO GROUND, PERMANENT FAULTS .
Check that the relay is not defective.
Check the cable between combined instrument panel #1 and parking brake connector #1 for a short-circuit to ground according to SHORT-CIRCUIT TO GROUND, PERMANENT FAULTS .
Check the cable between combined instrument panel #1 and combined instrument panel supply relay (2/29) #1 for an open-circuit according to OPEN-CIRCUIT, PERMANENT FAULTS and a short-circuit to ground according to SHORT-CIRCUIT TO GROUND, PERMANENT FAULTS .
Check the cable between combined instrument panel #14 and ground for an open-circuit according to OPEN-CIRCUIT, PERMANENT FAULTS and a short-circuit to supply voltage according to SHORT-CIRCUIT TO SUPPLY VOLTAGE. PERMANENT FAULTS .
Remedy as necessary
Other information:
- To connect the breakout box, see CONNECTING THE DRIVER INFORMATION MODULE (DIM) TEST BOX .
- For other values, see DRIVER INFORMATION MODULE (DIM) SIGNAL DESCRIPTION .
Was a fault detected?
- YES
Refer to VERIFICATION
- NO
FAULT NOT FOUND: Troubleshooting has been completed.