Cargo Compartment Wall

Fig 1: View Of Cargo Compartment Wall Measurement

Courtesy of VOLVO CARS CORPORATION

Before installing check the measurement at point A = 410 mm. Adjust as necessary.

Fig 2: View Of Cargo Compartment Wall Support Plate

Courtesy of VOLVO CARS CORPORATION

Fig 3: View Of Cargo Compartment Wall

Courtesy of VOLVO CARS CORPORATION

Position the cargo compartment wall with the clamps into the car.
Open the upper clamp and affix it loosely on the top bar of the safety grille.
Open the lower clamp and affix it as illustrated. Tighten the clamps only exactly as much as necessary to grip the grille, do not tighten them yet.

Fig 4: View Of Cargo Compartment Wall Support Plate

Courtesy of VOLVO CARS CORPORATION

Adjust so that the cargo compartment wall is vertical and in the center of the cargo compartment.
Screw up the support plate (1) so that it is in contact with the headlining panel. The support plate must be parallel with the roof panel.
Screw down the rear support foot (2) so that the cargo compartment wall is tensioned.
Screw down the front support foot (3) so that the cargo compartment wall stands in a straight, vertical position.

Fig 5: Identifying Cargo Compartment Wall Knobs

Courtesy of VOLVO CARS CORPORATION

Tighten the knobs (1) and (2).
Check that the cargo compartment wall does not make contact with the tailgate when it closes.