LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2009 >> XC90 V8 R-Design >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Camshaft Seal And Air Cleaner Housing - Removal And Installation >> Engine Mechanical >> VVT Unit >> Installation

VVT Unit: Installation

Fig 1: Installing VVT Units
GLL172774Courtesy of VOLVO CARS CORPORATION
NOTE:

Only tighten the bolts finger tight at this stage.

Fig 2: Crankshaft Holder Tool (9995451) Installed
GLL155209Courtesy of VOLVO CARS CORPORATION

see 9995451

Install timing belt, see TIMING BELT

Fig 3: Torque VVT Unit Bolts to Specification
GLL172776Courtesy of VOLVO CARS CORPORATION

Torque:  VVT unit, center screw

120 Nm

Fig 4: Install Lift Hook, Bolts
GLL172835Courtesy of VOLVO CARS CORPORATION
  1. Torque:  M10

    50 Nm

  2. Torque:  M6

    10 Nm

Install the following items: 

Fig 5: Installing Intake Plenum, Front View
GLL172797Courtesy of VOLVO CARS CORPORATION

Torque:  M6

10 Nm

Fig 6: Installing Intake Plenum, Rear View
GLL172796Courtesy of VOLVO CARS CORPORATION

Torque:  M6

10 Nm

Install the air filter housing, see INTAKE AND EXHAUST SYSTEM - REMOVAL, REPLACEMENT AND INSTALLATION

scientia non olet · About LEMON Manuals