Parking Assistance, Rear: Preparations
- Clean the sensors. Use: Isopropanol
- Allow to dry.
- Carefully mat the surface down. Use: Glasspaper, grade P1000
- Clean the sensors again. Use: Isopropanol
- Allow to dry.
- Avoid contact with the cleaned surfaces.
CAUTION:
Protect the connections' contact surfaces against paint.
- Paint the sensors in color code 426.
- Use Volvo Touch-up paint. (Only use base coat.)
- Use: Volvo 2-K Varnish. P/N: 31335447
NOTE:
Also read the instructions on the spray can.
CAUTION:
The paint must have dried after the first application.