Diagnostic Trouble Code (DTC) Information PBM-U200264
Condition
Park Brake Module (PBM) checks information from switch parking brake.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal from switch parking brake is defective.
- Incorrect signal lasts longer than 60 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated function.
- Ignition position 0, I and II.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Switch parking brake is stuck in activated position.
Fault symptom[s]
- Warning lights and chimes/Parking brake indication/no indication
- Text window and warning symbol/Yellow symbol and text message
- Electrical parking brake; No Functionality
- Electrical parking brake; Reduced Functionality