Diagnostic Trouble Code (DTC) Information PBM-C200701
Condition
Park Brake Module (PBM) supplies voltage to right brake caliper directly via an output.
The diagnostic trouble code (DTC) is stored if the control module detects that:
- The signal is incorrect.
- Incorrect signal lasts longer than 0.2 seconds.
The control module's test for the diagnostic trouble code (DTC) starts in the event of:
- Activated function.
- Ignition position 0, I and II.
NOTE:
The control module can only detect the fault once the test has been started and the diagnostic trouble code (DTC) is stored when the conditions are met.
Substitute Value
- None.
Possible Source
- Open-circuit in the signal cable.
- Damaged brake caliper.
Fault symptom[s]
- Information lamp is on
- Message in information display
- Electrical parking brake; Reduced Functionality