Master Cylinder, Brake: Finishing

INSTALLING THE SPLASH GUARD 

Fig 1: Identifying Splash Guard

Courtesy of VOLVO CARS CORPORATION

Install: 

• the protective cover.
• the plastic nut, x 1
• the hoses into the clip.

Fig 2: Removing/Installing Battery Box

Courtesy of VOLVO CARS CORPORATION

Install: 

• the battery box
• the temperature sensor connector from the battery box
• the 3 screws
• the battery as shown: BATTERY, REPLACING .

Fig 1: Identifying Battery Box And Screws

Courtesy of VOLVO CARS CORPORATION

Install: 

• the battery box (2)
• the 1 M6 screws (3)
• the battery as shown: BATTERY, REPLACING .