WASTEGATE Control Valve Adjustment: Adjustment

NOTE:

Turn the adjusting screw counter-clockwise to increase stroke. Turn the adjusting screw clockwise to decrease stroke.

NOTE:

One revolution corresponds to approx. 1 mm stroke.

Fig 1: Identifying Wastegate Adjustments

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION:

Take extra care when handling the component.

Adjust to specified average value.
See information about wastegate valve, see WASTEGATE VALVE

Fig 2: Locating Lock Nut

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION:

Take extra care when handling the component.

Torque: Pressure regulator, lock nut adjuster rod

7 Nm

Repeat the method to verify that the average value is according to specifications.