Checking the component and wiring, steering wheel module (SWM)

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition on

  Click on the VCT2000 symbol.

  Read off the status of the buttons in the cruise control switch. Check that the status changes between Off and On when the relevant button is pressed in.

  If the function is correct, there is communication between the cruise control and steering wheel module (SWM).

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the status of the cruise control change when the button is pressed? 

• YES 

  Refer to Checking components and wiring, engine control module (ECM) 

• NO 

  Refer to Checking the contact reel