Applies To Vehicles With Drive E

Fig 1: Drilling Out Rivets

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Screws

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Panel

Courtesy of VOLVO CARS CORPORATION

Fig 1: Cutting Out Panel At Front Mounting

Courtesy of VOLVO CARS CORPORATION

Fig 2: Identifying Underside Panel

Courtesy of VOLVO CARS CORPORATION

Fig 3: Identifying Screws

Courtesy of VOLVO CARS CORPORATION

NOTE: Do not tighten the clips and screws fully yet.

Fig 4: Identifying Screws And Clips

Courtesy of VOLVO CARS CORPORATION

Fig 5: Tightening Screws And Clips

Courtesy of VOLVO CARS CORPORATION