Checking Outer Switches, Door Handle (2007): Verify

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS CORPORATION

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on
• Check the function of the switches in the door handle by clicking on the VCT2000 symbol
• Select the desired door handle and press start.

  Pull the door handle to be checked to the limit position. The value for both switches on the same door handle should be Activated  .

  Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA

  Courtesy of VOLVO CARS CORPORATION

Is the function OK? 

• YES 

  OKAY:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION