Checking The Connectors
- Ignition off.
Check the upper electronic module (UEM), sun roof module (SRM) and wiring connectors (54/3R and 54/13). Check for contact resistance and oxidation. Check for loose connections.
Check for damage carefully.
Reinstall the components, reconnect the connectors etc.
Ignition on.
Operate the sun roof.
Other information
- To access the upper electronic module (UEM), see UPPER ELECTRONIC MODULE (UEM)/REARVIEW MIRROR, REPLACING
- To access the sun roof connector, see CONTROL MODULE, SUN ROOF, REPLACING
- see CHECKING WIRING AND TERMINALS .
Do the sun roof controls operate?
- YES
OKAY: Troubleshooting has been completed.
- NO
Refer to CHECKING COMPONENTS AND WIRING