Checking The Shunt And Wires
Check the fuse 11C/21.
Check the connection between the fuse 11C/21 and the central electronic module (CEM) B23 (E3).
Check that the shunt 2 has a flasher signal, 20/32 for left direction indicator and 20/34 for right direction indicator.
Check the wire between the shunt 2 and each direction indicator as shown in the table below.
| Front left flasher | 10/9 2 |
| Front left side flasher | 10/15 2 |
| Rear left flasher | 10/54 4B |
| Front right flasher | 10/10 2 |
| Front right side flasher | 10/16 2 |
| Rear right flasher | 10/47 4B |
Check relevant ground connection.
HINT: Ground connection is 3 for front flasher, 1 for side flasher and 1B for rear flasher.