Rear Brake Pads - Removal And Installation

• Brakes
  • Brake Pads Rear, Replacing
    • Removal
      • Notes
      • Remove The Retaining Springs And Locating Pins For The Brake Pads.
      • Remove The Brake Caliper And Brake Pads
      • Clean And Check The Brake Caliper And Dust Cover
      • Check The Brake Disc
    • Installation
      • Lubricating The Sliding Surfaces
      • Refit The Brake Lining And Brake Caliper
      • Install The Locating Pins In The Brake Caliper
      • Check The Brake Fluid Level In The Reservoir
  • Checking For Air In The Brake System And For Brake Fluid Leakage