Installing The Air Cleaner (ACL)
Install:
- the air cleaner (ACL), tighten the hose clamp to the mass air flow (MAF) sensor
- the brake vacuum hose on the vacuum pump
- the fresh air intake hose
- the screws, x 2, to the fresh air intake hose in the front cover plate
- the connectors, x 2, for the Engine Control Module (ECM)
- the connector for the mass airflow sensor (MAF)
- the tie strap to the cable harness in the air cleaner (ACL) housing
- the cover over the air cleaner (ACL).