Brake Disc Rear, Checking: Check

Fig 1: Identifying Special Service Tools

Courtesy of VOLVO CARS CORPORATION

Remove the wheel, see WHEELS

Remove brake caliper rear, see REAR BRAKE CALIPER (2012)

Fig 2: Identifying Tightening Sequence

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that the mating faces are clean and free of foreign material.

Torque: Wheel to wheel hub

• Stage 1: 20 Nm

• Stage 2: 140 Nm

Fig 3: Identifying Special Service Tool

Courtesy of VOLVO CARS CORPORATION

Fig 4: Measuring Disc Runout Using Special Service Tools

Courtesy of VOLVO CARS CORPORATION

Slowly rotate the brake disc and note the dial indicator gauge readings.

NOTE:

The following steps are only necessary when installing a new component.

Remove brake disc rear, see REAR BRAKE DISC

Perform wheel hub rear, checking, see WHEEL HUB REAR, CHECKING