Brake Disc Front, Checking: Removal: Check

Fig 1: Identifying Special Service Tools

Courtesy of VOLVO CARS CORPORATION

Remove brake calliper, front, see FRONT BRAKE CALIPER

Fig 2: Identifying Tightening Sequence

Courtesy of VOLVO CARS CORPORATION

NOTE:

Make sure that the mating faces are clean and free of foreign material.

Torque: 14

130 Nm

Fig 3: Identifying Special Tool 999 5420

Courtesy of VOLVO CARS CORPORATION

Fig 4: Measuring Disc Runout Using Special Service Tools

Courtesy of VOLVO CARS CORPORATION

Slowly rotate the brake disc and note the dial indicator gauge readings.

NOTE:

The following steps are only necessary when installing a new component.

Perform wheel hub front, checking, see WHEEL HUB FRONT, CHECKING

Remove the front brake disc, see FRONT BRAKE DISC