LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> V50 Base, 2.4 39 >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic-Vacuum-Hydraulic Brakes - Removal, Replacement And Installation >> Vacuum Pump, Tank, Line And Valve (2005-2011) >> Brake Booster Vacuum Hose >> Removal >> Removing The Master Cylinder

Removing The Master Cylinder

Fig 1: Identifying Brake Master Cylinder Fasteners
GLL140026Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove the 2 nuts. Pull the master cylinder out from the studs. Allow the master cylinder to hang from the brake pipes.

NOTE:

Do not damage the brake pipes when removing the master cylinder.

scientia non olet · About LEMON Manuals