Brake Disc Rear, Check: Check

Fig 1: Identifying Special Service Tools

Courtesy of VOLVO CARS CORPORATION

Remove the wheel. See WHEELS

Remove brake caliper rear. See REAR BRAKE CALIPER in WHEEL BRAKE - REMOVAL, REPLACEMENT AND INSTALLATION

Fig 2: Identifying Tightening Sequence And Area For Cleaning

Courtesy of VOLVO CARS CORPORATION

NOTE: Make sure that the mating faces are clean and free of foreign material.

Torque: Wheel to wheel hub

• Stage 1: 20 Nm

• Stage 2: 140 Nm

Fig 3: Identifying Special Service Tool

Courtesy of VOLVO CARS CORPORATION

Fig 4: Measuring Disc Runout Using Special Service Tools

Courtesy of VOLVO CARS CORPORATION

Slowly rotate the brake disc and note the dial indicator gauge readings.

NOTE: The following steps are only necessary when installing a new component.

Perform wheel hub rear, checking, see WHEEL HUB REAR, CHECKING