Removing The Muffler
NOTE:
If the joint is missing between the front and center mufflers, both mufflers must be replaced.
Only applies at the first change when the joint between the front and center mufflers is missing.
Remove:
- the M10 nut for the clamp between the rear and center mufflers
- the 2 x nuts
- the rubber mountings
- the front and center mufflers
- the flange gasket.
Applies to the second or later changes
Remove:
- the M10 nut for the clamp between the front and center muffler
- the 2 x nuts
- the muffler
- the flange gasket.
HINT: Tap carefully around the joint to crack any rust and soot deposits in the joint. Use a hammer. Remove both the center and front mufflers.