Communication Fault: Verification
HINT: After carrying out the repair, check that the fault has been remedied.
- Ignition off
- Reinstall the connectors, components etc.
- Ignition on.
Activate the windshield wipers in the intermittent wiping position.
Activate the windshield wipers in the low speed position.
Activate the windshield wipers in the high speed position.
Check the function. See RAIN SENSOR, CHECK
Check that the function is OK.
Is the function OK?
- YES
VERIFIED: Troubleshooting has been completed.
- NO
Refer to INFORMATION