Signal Missing (2008-11): Verification

HINT: After carrying out the repair, check that the fault has been remedied. 

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Connecting Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off
• Reinstall the connectors, components etc.
• Ignition on.

  Check that it is possible to activate the starter motor.

  Check that it is possible to remove the key from the ignition switch.

  If the vehicle has GDL lamps, also check the following:

  • Activate low beam
  • Activate high beam flash
  • Activate high beam.

  Check that the functions are OK.

Are the functions OK? 

• YES 

  VERIFIED:  Troubleshooting has been completed.

• NO 

  Refer to INFORMATION