Test With Another Control Module

NOTE: Do not program a new Steering Column Lock Module (SCL) since Steering Column Lock Module (SCL) only can be programmed once.

Fig 1: Identifying Ignition In Off Position

GLL101046

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off.
Try to replace the control module without programming it.
Click on the VCT2000 symbol.
Check to see if the diagnostic trouble code (DTC) recurs.
If the diagnostic trouble code does not return this indicates that the original control module is defective and needs to be replaced.

Other information
- see STEERING LOCK
Fig 2: Identifying VCT2000 Diagnostic Tool Symbol In VIDA
Courtesy of VOLVO CARS OF NORTH AMERICA.

Does the diagnostic trouble code (DTC) recur?

YES
Refer to CHECK LIN DIAGNOSTIC TROUBLE CODES (DTCS)
NO
Refer to REPLACING THE CONTROL MODULE