Diagnostic Trouble Code (DTC) Information CEM-9F33

Condition 

The central electronic module (CEM) checks the brake fluid level.

The diagnostic trouble code (DTC) is stored if the control module detects that:

• Low brake fluid level.

The control module's test for the diagnostic trouble code (DTC) starts in the event of:

• Ignition switch position II.
• Battery voltage between 9 - 16 V.

Substitute Value 

• None.

Possible Source 

• Low brake fluid level.
• The cause of the malfunction may be that the sensor is loose or not connected correctly.

Fault symptom[s] 

• Message in information display