Checking Component And Wiring

Missing function may be due to a blown fuse.

Check that fuse is intact.

Check that relay 2/34 is correctly installed.

Also check the relay terminal, in particular 2/34 terminal #2, for an open-circuit.

Remedy as necessary.

Other information 

• see CONNECTING THE BREAKOUT BOX (2004, 2005, 2006, 2007)
• see SIGNAL DESCRIPTION CENTRAL ELECTRONIC MODULE (CEM) (2004, 2005, 2006, 2007)
• To replace the relay:

  see CABLE, BATTERY TO GENERATOR, B5254T3 or CABLE, BATTERY TO GENERATOR, B5244S4

• see CHECKING WIRING AND TERMINALS

Fig 2: Identifying 32-Bit Connector

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to VERIFICATION