Checking Component And Wiring
- Ignition off.
Check that relay 2/34 is correctly installed.
Also check the relay terminal, in particular 2/34 terminal #2. Check for a short-circuit to supply voltage.
Remedy as necessary.
Other information
- see CONNECTING THE BREAKOUT BOX (2004, 2005, 2006, 2007)
- see SIGNAL DESCRIPTION CENTRAL ELECTRONIC MODULE (CEM) (2004, 2005, 2006, 2007)
- To replace the relay, see:CABLE, BATTERY TO GENERATOR, B5244S4 or CABLE, BATTERY TO GENERATOR, B5254T3
- see CHECKING WIRING AND TERMINALS
- Continue
Refer to VERIFICATION