Programming, Control Module

To program the gas discharge lamp module (GDL) with vehicle parameters and to calibrate the position sensor, see CALIBRATION OF POSITION SENSOR, GDL LAMPS .

Remedy as necessary.

Other information: 

• see CONNECTING THE BREAKOUT BOX (2004, 2005, 2006, 2007)
• see SIGNAL DESCRIPTION CENTRAL ELECTRONIC MODULE (CEM) (2004, 2005, 2006, 2007)
• see CONTROL MODULE RELAY BOX PASSENGER COMPARTMENT
• see CHECKING WIRING AND TERMINALS

Fig 1: Identifying Right-Hand Gas Discharge Lamp Module

Courtesy of VOLVO CARS OF NORTH AMERICA.

Refer to VERIFICATION