Checking Component And Wiring
Check the control signal cable. Check for a short-circuit to ground.
- Set the Light Switch Module (LSM) in the position for side control according to full lock (ABL)
Take readings between:
- Central electronic module (CEM) #A37 (#37) and #A28 (#28).
Remedy as necessary.
Other information
- see CONNECTING THE BREAKOUT BOX (2008, 2009, 2010, 2011)
- see SIGNAL DESCRIPTION CENTRAL ELECTRONIC MODULE (CEM) (2008, 2009, 2010, 2011)
- To access the central electronic module (CEM), see: CONTROL MODULE RELAY BOX PASSENGER COMPARTMENT
- see CONTENTS
- Continue
Refer to VERIFICATION