Remove the hose for the clutch cylinder

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Brake Fluid Reservoir And Clutch Slave Cylinder Hose Blocked Using Hose Pliers

Courtesy of VOLVO CARS OF NORTH AMERICA.

Block the hose between the brake fluid reservoir and clutch slave cylinder. Use hose pliers.

Remove the retaining clip from the clutch pipe junction.

Remove the pipe from the junction and from the clip in the side member.

NOTE:

Seal the openings against contamination. Wipe up any spilled brake fluid.