Remove the control arms and the tie rod from both sides
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- the link for the anti-roll bar up at the spring strut. Counterhold using Torx 30. The rubber boot must not be twisted
- the tie rod from the wheel spindle. Use puller 9995259
- the screw for the drive shaft.