Disconnect on the right side
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Turn the stub axle to the right as much as possible.
Remove the cover for the drive shaft pilot bearing
Remove the hub from the spring strut. Twist the stub axle out. Pull out the drive shaft from the transmission and bearing housing.
Turn the shaft forward. Hang it from the front exhaust pipe (upwards) using a tie strap. Take care not to damage the sealing ring in the transmission. Install plug 9995488 .
Temporarily secure the stub axle to the spring strut using one of the bolts.