Connecting the breakout box
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition off.
- Expose the combined instrument panel.
- Disconnect the connector from the combined instrument panel.
On the combined instrument panel connector, check that:
- The male and female terminals are undamaged and properly attached (cannot be pressed in).
- The wiring for the female terminals is securely connected.
- In particular check those terminals that are relevant to the stored diagnostic trouble code (DTC) / symptoms.
- Connect adapter 9511372 to the combined instrument panel connectors A and B (wiring side). Connect breakout box 9813190 to the adapter.