Quick-tests, calibrations

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Quick-tests or calibrations are functions or checks that are integrated in the control module's software and are started by the control module using commands from the diagnostics tool.

Wit this service it is possible to start certain pre-defined checks or teach-ins. Examples of these are:

Quick-test of fuel tank system
Quick-test of camshaft control
Resetting of adaptions and counter for oil
Calibration of gear position sensor
Calibration of components for Brake control module (BCM)

NOTE: To enable start and running of these services, it is often that certain start conditions must be fulfilled.