LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Battery, Brakes, Central Electronic Module (CEM), Climate Units, Engine Management System (Ems), Diagnosis - Design And Function (644 Body)) >> Diagnosis (2000-2004) >> Diagnostic Versions And Communication Methods >> Volvo Diagnostics II - first version

Volvo Diagnostics II - first version

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating OBD II - On Board Diagnostic II
GLL110737Courtesy of VOLVO CARS OF NORTH AMERICA.

Volvo Diagnostics II - first version  was a new Volvo standard introduced in 1996  . This meant that control modules communicated serially in the same way, and that diagnostic functions in the different systems were designed in a similar manner.

The communication cable in the vehicle used for this communication is common to all control modules in question. The control modules are connected to the same connection in the diagnostic socket (pin 7).

The diagnostic socket is located in the passenger compartment and for certain markets it is common with the diagnostics system OBD II.

Volvo Diagnostics II, first version, was introduced in 1996 on, among others: 

For certain models, the diagnostics tool for this diagnosis is still Volvo System Tester (car models from and incl. model year 1998 as well as certain systems for model year 1999).

The diagnostics tool VIDA, now replacing VADIS, is used for car models of model year 1999 and later.