Tripod constant velocity joint boot (left side for M3P and M5P) on the drive shaft, replacing
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Remove:
- the tripod from the drive shaft
- the snap ring
- the tripod with an extractor for tripods
- the boot from the drive shaft
- the clip.
Carefully pull the boot over the bearing.
NOTE:
Remove the steel ring from the boot if necessary.