Removing the drive shaft

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Drive Shaft Removal

Courtesy of VOLVO CARS OF NORTH AMERICA.

(Left-hand side in the graphic.)

Turn the wheel (steering left).

Angle the wheel spindle and remove the drive shaft from the hub and transmission.

CAUTION: Do not damage the seal in the hub.

Temporarily secure the wheel spindle to the spring strut with one of the screws.

Install plug 9995488 in the transmission.

CAUTION: Ensure that no dirt gets into the wheel hub bearing.