Tightening the drive shaft nut

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Tightening/Removing Drive Shaft Nut

Courtesy of VOLVO CARS OF NORTH AMERICA.

Lower the car.

Apply the parking brake.

Move the gear selector to P.

Tighten the drive shaft nut. See Center nut, drive shaft and tightening torque .

Install the wheel cover.

Remove the lifting tools from the engine compartment.

Install the cover over the engine.