The drive shaft and vibration damper
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Clean off any grease and dirt from the drive shaft. Install the vibration damper following the measurement made earlier.
HINT: To enable the vibration damper to slide more easily, apply a soap solution to the shaft and hole in the vibration damper.
Install new clamps.