LEMON Manuals: Even more car manuals for everyone
Home >> Volvo >> 2008 >> S40 T-5, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Rear Axle, Drive Shafts - Removal, Replacement And Installation (644 Body)) >> Replacing Drive Shafts (Aw55-50/51SN; 2001-2004) >> Replacing the drive shaft boot on the wheel side >> Removing the ball holder and inner ring from the shaft

Removing the ball holder and inner ring from the shaft

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Ball Holder And Inner Ring From Shaft
GLL108679Courtesy of VOLVO CARS OF NORTH AMERICA.

Turn the inner ring 90 degrees in relation to the ball holder.

Remove the inner ring.

scientia non olet · About LEMON Manuals